Nema 17 Tr5 Tr6 Tr8 Tr10 BFISS42-C03A Integrated Linear Stepper Servo Motor with External Lead Screw 42x42x68mm CANopen Control 1.68A 0.5N.m with Integrated Driver

Linear Stepper Motors can dramatically reduce cost and save space. There is no coupling, no additional bearing support and no assembly work required. This not only reduce cost but also reduce failure rate due to the less number of components and more simple construction. In applications with small load ratings a linear guide is also not required. The special design and material of the nut secure long life operations.

BesFoc nema 17 BFISS42-C03A 42x42x68mm integrated stepper servo motor with CANopen control 1.8Degree 1.68A 1.65Ω 0.5N.m with 17bit integrated driver. For more different integrated servo motor requirements please contact us!!!

Customized Requirements：

• Different shaft and stroke length

• Special nut design

• Higher IP protection

  
  

Electrical Specifications：

• Type: Nema17 external lead screw linear stepper motor with built-in driver

• Model Name: BFISS42-C03A

• Phase: 2

• Step Angle: 1.8 degree

• Voltage: 2.8V

• Current: 1.68A

• Resistance: 1.65Ω±10%(20℃)

• Inductance: 2.8mH±20%(1kHz 1V RMS) 

• Holding Torque: 0.5Nm(70.81oz.in)

• Encoder: 1000ppr / 17Bit

• Control Method: CANopen (RS485, CANopen optional)
  

  
  

Physical Specifications:

• Frame Size: Nema 17 (42 x 42mm)

• Body Length: 68mm

• Shaft Diameter: 5mm

• Shaft Length: 24mm

• Shaft Diameter: Tr5, Tr6, Tr8, Tr10

• Shaft Type: T-type External Lead Screw

  
  

Integrated Linear Stepper Servo Motors Features:

• Cortex-M4 core high-performance 32-bit micro controller

• The highest pulse response frequency can reach 200KHz
  

• Built in protection function, effectively ensuring the safe use of the device
  

• Intelligent current regulation to reduce vibration, noise, and heat generation

• Adopting low internal resistance MOS, the heating is reduced by 30% compared to ordinary products

• Voltage range: DC12V-36V

• Integrated design with integrated drive motor, easy installation, small footprint, and simple wiring

• Equipped with anti reverse connection function
  

Communication method:

• Pulse type

• RS485 MOdbus RTU network type

• CANopen network type
  

  
  

Protection level:

Waterproof type: IP30, IP54, IP65, optional

42mm Integrated Linear Stepper Servo Motors Usage:

BesFoc integrated stepper motor linear actuator is available in non-captive, external linear and captive options. Captive and external linear are also available with integrated build in controller or driver.

They are available in a wide variety of resolutions from x mm/rev to y mm/rev. In addition to our standard configurations can we custom design this stepper motor linear actuator to meet your specific application requirements. The range come in six sizes from 20mm to 86mm square flange NEMA8, NEMA11,NEMA17,NEMA23 and NEMA34. 

Typical Application:

• Precise and rapid positioning

• X-Y tables

• Optical scanning equipment

• Mechanical or acoustic measurements

• Medical valve and pump equipment

• Semiconductor handling

• Industrial Multi axis machines

• Paperhandling

• Food processing